Certified FD60 fire doors for Rayleigh
Getting FD60 fire doors right in Rayleigh means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Rayleigh is about 6 miles from Southend-on-Sea; we cover both, along with South Benfleet, Wickford and Pitsea.
What the law says in Rayleigh
New and replacement fire doors in Rayleigh are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Rayleigh?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Rayleigh are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Rayleigh
Typical uses for FD60 fire doors in Rayleigh include stair cores in taller blocks and plant and boiler rooms.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Rayleigh property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Essex
What does a Rayleigh quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Rayleigh?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Rayleigh free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- South Benfleet (3 miles)
- Wickford (4 miles)
- Pitsea (4 miles)
- Canvey Island (4 miles)
- Southend-on-Sea (6 miles)
- Basildon (6 miles)
Other products in Rayleigh
- Commercial & Office Fire Doors in Rayleigh
- Fire-Rated Screens & Fanlights in Rayleigh
- Acoustic Fire Doors in Rayleigh
- FD90 & FD120 Doorsets in Rayleigh
- HMO Fire Doors in Rayleigh
- Steel Fire Doors in Rayleigh
- Composite Fire Doors in Rayleigh
- Communal & Corridor Fire Doors in Rayleigh
- FD60 Fire Doorsets across Essex
- All fire doors in Rayleigh