Our Torquay supply and fit service
We cover Torquay and nearby Paignton for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Torquay is about 28 miles from Plymouth. Wherever your building is in TQ1, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Torquay?
Fire doors in Torquay sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Torquay
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Torquay quote is fixed after survey and itemised door by door.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are used in Torquay
Wherever they are in Torquay, FD60 fire doors are most often specified for higher-risk stores and plant and boiler rooms.
Devon's demand comes from Plymouth's post-war city centre and naval estate, Exeter's offices and student housing, and coastal hotels.
- Higher-risk stores
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Torquay: questions
What does a Torquay quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Torquay?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD60 fire doors in Torquay need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Nearby towns we cover
- Paignton (2 miles)
- Newton Abbot (6 miles)
- Exmouth (12 miles)
- Heavitree (18 miles)
- Exeter (18 miles)
- Plymstock (26 miles)
Other products in Torquay
- Stairwell & Escape Route Doors in Torquay
- Communal & Corridor Fire Doors in Torquay
- School & Healthcare Fire Doors in Torquay
- Composite Fire Doors in Torquay
- Fire Door Replacement in Torquay
- Flat Entrance Fire Doors in Torquay
- Double & Leaf-and-a-Half Fire Doors in Torquay
- Steel Fire Doors in Torquay
- FD60 Fire Doorsets across Devon
- All fire doors in Torquay