FD30S Smoke Control Doorsets for Halifax buildings
We fit FD30S smoke control doorsets for flats, stairs and corridors in Halifax and the rest of West Yorkshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Halifax is about 14 miles from Leeds. Wherever your building is in HX3, we arrange survey and fitting dates around access and occupancy.
Regulations for FD30S fire doors in West Yorkshire
New and replacement fire doors in Halifax are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30S fire doors cost in Halifax?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Halifax are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are needed
Typical uses for FD30S fire doors in Halifax include protected stairways and lobby doors in blocks of flats.
Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.
- Protected stairways
- Lobby doors in blocks of flats
- Cross-corridor doors
- Integral garage doors
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Halifax property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD30S fire doors in Halifax
What does a Halifax quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Halifax free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Halifax?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Nearby towns we cover
- Brighouse (3 miles)
- Huddersfield (6 miles)
- Cleckheaton (6 miles)
- Bradford (7 miles)
- Shipley (9 miles)
- Batley (9 miles)
More doorsets for Halifax
- Flat Entrance Fire Doors in Halifax
- Fire-Rated Screens & Fanlights in Halifax
- HMO Fire Doors in Halifax
- Fire Exit Doors in Halifax
- Stairwell & Escape Route Doors in Halifax
- FD60 Fire Doorsets in Halifax
- Acoustic Fire Doors in Halifax
- School & Healthcare Fire Doors in Halifax
- FD30S Smoke Control Doorsets across West Yorkshire
- All fire doors in Halifax