Certified FD30S fire doors for Burngreave
We fit FD30S smoke control doorsets for flats, stairs and corridors in Burngreave and the rest of South Yorkshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Burngreave is about 1 mile from Sheffield; we cover both, along with Sheffield, Rotherham and Chapeltown.
Regulations for FD30S fire doors in South Yorkshire
New and replacement fire doors in Burngreave are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30S fire doors in South Yorkshire
Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Burngreave quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are needed
Wherever they are in Burngreave, FD30S fire doors are most often specified for cross-corridor doors and integral garage doors.
Sheffield's city-centre apartment and student blocks lead demand, with Rotherham, Doncaster and Barnsley adding warehouses, schools and estates.
- Cross-corridor doors
- Integral garage doors
- Protected stairways
- Lobby doors in blocks of flats
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Burngreave property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in South Yorkshire
How quickly can you survey in Burngreave?
We arrange surveys around your access needs and, where possible, combine Burngreave visits with other work in South Yorkshire. Tell us your preferred dates when you enquire.
What does a Burngreave quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Burngreave.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Neighbouring areas
- Sheffield (1 mile)
- Rotherham (5 miles)
- Chapeltown (5 miles)
- Dronfield (6 miles)
- Staveley (10 miles)
- Chesterfield (10 miles)
Other fire doors in Burngreave
- Acoustic Fire Doors in Burngreave
- Fire Door Replacement in Burngreave
- Fire Exit Doors in Burngreave
- FD90 & FD120 Doorsets in Burngreave
- School & Healthcare Fire Doors in Burngreave
- Stairwell & Escape Route Doors in Burngreave
- Fire Door Ironmongery & Closers in Burngreave
- Composite Fire Doors in Burngreave
- FD30S Smoke Control Doorsets across South Yorkshire
- All fire doors in Burngreave