Certified FD30S fire doors for Market Harborough
We fit FD30S smoke control doorsets for flats, stairs and corridors in Market Harborough and the rest of Leicestershire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Market Harborough is about 14 miles from Leicester; we cover both, along with Corby, Kettering and Wigston.
What the law says in Market Harborough
New and replacement fire doors in Market Harborough are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30S fire doors cost in Market Harborough?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Market Harborough are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD30S fire doors are needed
Protected stairways and integral garage doors are among the most common settings for FD30S fire doors, in Market Harborough as elsewhere.
Leicester's city-centre flats, student blocks and industrial buildings sit alongside Loughborough's university and market towns across the county.
- Protected stairways
- Integral garage doors
- Cross-corridor doors
- Lobby doors in blocks of flats
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD30S fire doors in Market Harborough: questions
Do you work for landlords and managing agents in Market Harborough?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Market Harborough.
Can you fit just one door in Market Harborough?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Leicestershire.
Which doors in a block of flats need FD30S?
Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.
Nearby towns we cover
- Corby (10 miles)
- Kettering (10 miles)
- Wigston (10 miles)
- Oadby (11 miles)
- Leicester (14 miles)
- Wellingborough (16 miles)
Also available in Market Harborough
- School & Healthcare Fire Doors in Market Harborough
- Double & Leaf-and-a-Half Fire Doors in Market Harborough
- Glazed Fire Doors in Market Harborough
- Flat Entrance Fire Doors in Market Harborough
- Fire-Rated Screens & Fanlights in Market Harborough
- Stairwell & Escape Route Doors in Market Harborough
- Fire Door Supply & Fit in Market Harborough
- FD30 Fire Doorsets in Market Harborough
- FD30S Smoke Control Doorsets across Leicestershire
- All fire doors in Market Harborough