Certified FD30S fire doors for Hythe
Looking for FD30S fire doors in Hythe? Our supply and fit service covers SO45 and the surrounding area, including Southampton and Totton. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Hythe is about 3 miles from Southampton. Wherever your building is in SO45, we arrange survey and fitting dates around access and occupancy.
Regulations for FD30S fire doors in Hampshire
In Hythe, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Hythe
Guide prices for FD30S fire doors in Hythe run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Hythe
In Hythe, FD30S fire doors are typically needed in protected stairways and lobby doors in blocks of flats.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Protected stairways
- Lobby doors in blocks of flats
- Integral garage doors
- Cross-corridor doors
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD30S fire doors in Hythe
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hythe.
What does a Hythe quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Hythe?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Nearby towns we cover
- Southampton (3 miles)
- Totton (6 miles)
- Eastleigh (7 miles)
- Cowes (8 miles)
- Fareham (10 miles)
- Newport, Isle of Wight (12 miles)
Other products in Hythe
- Fire Door Replacement in Hythe
- Steel Fire Doors in Hythe
- FD30 Fire Doorsets in Hythe
- School & Healthcare Fire Doors in Hythe
- Timber Fire Doorsets in Hythe
- Commercial & Office Fire Doors in Hythe
- Communal & Corridor Fire Doors in Hythe
- Flat Entrance Fire Doors in Hythe
- FD30S Smoke Control Doorsets across Hampshire
- All fire doors in Hythe