Certified FD30S fire doors for Bangor, Gwynedd
Looking for FD30S fire doors in Bangor, Gwynedd? Our supply and fit service covers LL59 and the surrounding area, including Colwyn Bay and Holyhead. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
We cover Bangor, Gwynedd and the rest of Gwynedd, with surveys arranged around your building's access and occupancy.
Which rules apply in Bangor, Gwynedd?
Fire doors in Bangor, Gwynedd are covered by the Welsh Building Regulations guidance for new work and by the Fire Safety Order 2005 for existing premises. Your fire risk assessment will say which doors need replacing and to what rating.
What do FD30S fire doors cost in Bangor, Gwynedd?
Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Bangor, Gwynedd, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are used in Bangor, Gwynedd
Integral garage doors and cross-corridor doors are among the most common settings for FD30S fire doors, in Bangor, Gwynedd as elsewhere.
Gwynedd and Anglesey are largely rural, with Bangor's university and hospital, hotels and holiday accommodation driving fire door work.
- Integral garage doors
- Cross-corridor doors
- Protected stairways
- Lobby doors in blocks of flats
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30S fire doors in Bangor, Gwynedd
What does a Bangor, Gwynedd quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD30S fire doors in Bangor, Gwynedd need to meet?
They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bangor, Gwynedd.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Neighbouring areas
- Colwyn Bay (17 miles)
- Holyhead (22 miles)
- Rhyl (27 miles)
- Flint (41 miles)
- Heswall (43 miles)
- Buckley (43 miles)
More doorsets for Bangor, Gwynedd
- Riser & Service Cupboard Doors in Bangor, Gwynedd
- HMO Fire Doors in Bangor, Gwynedd
- Acoustic Fire Doors in Bangor, Gwynedd
- FD30 Fire Doorsets in Bangor, Gwynedd
- Stairwell & Escape Route Doors in Bangor, Gwynedd
- Glazed Fire Doors in Bangor, Gwynedd
- Composite Fire Doors in Bangor, Gwynedd
- Flat Entrance Fire Doors in Bangor, Gwynedd
- FD30S Smoke Control Doorsets across Gwynedd
- All fire doors in Bangor, Gwynedd