FD30S fire doors in Hyde: how we work
Looking for FD30S fire doors in Hyde? Our supply and fit service covers SK14 and the surrounding area, including Denton and Dukinfield. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Hyde is about 7 miles from Manchester; we cover both, along with Denton, Dukinfield and Stalybridge.
What the law says in Hyde
In Hyde, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD30S fire doors cost in Hyde?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Hyde are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD30S fire doors
In Hyde, FD30S fire doors are typically needed in lobby doors in blocks of flats and protected stairways.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Lobby doors in blocks of flats
- Protected stairways
- Integral garage doors
- Cross-corridor doors
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater Manchester
How quickly can you survey in Hyde?
We arrange surveys around your access needs and, where possible, combine Hyde visits with other work in Greater Manchester. Tell us your preferred dates when you enquire.
Can you work around tenants or staff in Hyde?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Hyde quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Also covering towns near Hyde
- Denton (2 miles)
- Dukinfield (2 miles)
- Stalybridge (2 miles)
- Ashton-under-Lyne (2 miles)
- Droylsden (3 miles)
- Stockport (4 miles)
Other fire doors in Hyde
- Fire-Rated Screens & Fanlights in Hyde
- Communal & Corridor Fire Doors in Hyde
- Double & Leaf-and-a-Half Fire Doors in Hyde
- Riser & Service Cupboard Doors in Hyde
- Commercial & Office Fire Doors in Hyde
- FD30 Fire Doorsets in Hyde
- Glazed Fire Doors in Hyde
- Fire Door Ironmongery & Closers in Hyde
- FD30S Smoke Control Doorsets across Greater Manchester
- All fire doors in Hyde