Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Sutton

We supply and fit FD30S fire doors in Sutton (SM2) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £800 per single doorset in Sutton, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Certified FD30S fire doors for Sutton

Fire Rated Doors supplies and fits FD30S fire doors in Sutton, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

We cover SM2 and the surrounding area, including Carshalton. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Fire door rules in Sutton

Fire doors in Sutton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

What do FD30S fire doors cost in Sutton?

Our guide price for FD30S fire doors in Sutton is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Typical uses in Sutton

In Sutton, FD30S fire doors are typically needed in integral garage doors and lobby doors in blocks of flats.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Integral garage doors
  • Lobby doors in blocks of flats
  • Protected stairways
  • Cross-corridor doors

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Greater London

Which rules do FD30S fire doors in Sutton need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can you fit just one door in Sutton?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.

Is the survey in Sutton free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

FD30S Smoke Control Doorsets near Sutton

Other fire doors in Sutton

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.