FD30S fire doors in Islington: how we work
Getting FD30S fire doors right in Islington means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Whether your building is in central Islington or on its edges towards Highbury, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Islington
Because Islington is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD30S fire doors in Greater London
Guide prices for FD30S fire doors in Islington run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD30S fire doors are used in Islington
Protected stairways and cross-corridor doors are among the most common settings for FD30S fire doors, in Islington as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Protected stairways
- Cross-corridor doors
- Lobby doors in blocks of flats
- Integral garage doors
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30S fire doors in Islington
Which rules do FD30S fire doors in Islington need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Islington.
Is the survey in Islington free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
FD30S Smoke Control Doorsets near Islington
- Highbury (1 mile)
- Holloway (1 mile)
- Camden Town (2 miles)
- Chalk Farm (2 miles)
- London (2 miles)
- Archway (2 miles)
Also available in Islington
- Fire Door Supply & Fit in Islington
- Riser & Service Cupboard Doors in Islington
- Steel Fire Doors in Islington
- Fire-Rated Screens & Fanlights in Islington
- Fire Doors for Homes in Islington
- HMO Fire Doors in Islington
- FD30 Fire Doorsets in Islington
- Fire Exit Doors in Islington
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Islington