FD30 fire doors in St Helens: how we work
Looking for FD30 fire doors in St Helens? Our supply and fit service covers WA10 and the surrounding area, including Prescot and Ashton-in-Makerfield. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
St Helens is about 11 miles from Liverpool; we cover both, along with Prescot, Ashton-in-Makerfield and Huyton.
Fire door rules in St Helens
New and replacement fire doors in St Helens are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30 fire doors in Merseyside
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for St Helens are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are used in St Helens
Wherever they are in St Helens, FD30 fire doors are most often specified for plant rooms and stores and hotel corridors.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Plant rooms and stores
- Hotel corridors
- HMO bedrooms and kitchens
- Offices and retail back-of-house
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in St Helens
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30 fire doors in St Helens
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in St Helens.
Do you work for landlords and managing agents in St Helens?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
What does a St Helens quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
FD30 Fire Doorsets near St Helens
- Prescot (3 miles)
- Ashton-in-Makerfield (4 miles)
- Huyton (5 miles)
- Newton-le-Willows (6 miles)
- Great Sankey (6 miles)
- Golborne (6 miles)
More doorsets for St Helens
- Timber Fire Doorsets in St Helens
- Fire Door Ironmongery & Closers in St Helens
- Fire Exit Doors in St Helens
- Steel Fire Doors in St Helens
- Fire Doors for Homes in St Helens
- Stairwell & Escape Route Doors in St Helens
- FD90 & FD120 Doorsets in St Helens
- Glazed Fire Doors in St Helens
- FD30 Fire Doorsets across Merseyside
- All fire doors in St Helens