Our Maghull supply and fit service
Getting FD30 fire doors right in Maghull means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Maghull surveys with other visits in Merseyside, such as Kirkby and Litherland, which helps keep survey dates flexible.
Regulations for FD30 fire doors in Merseyside
In Maghull, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD30 fire doors prices in Maghull
Our guide price for FD30 fire doors in Maghull is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD30 fire doors
Typical uses for FD30 fire doors in Maghull include plant rooms and stores and offices and retail back-of-house.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Plant rooms and stores
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
FD30 Fire Doorsets: key specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD30 fire doors in Maghull
What does a Maghull quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Maghull?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Maghull free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Does an FD30 door need a self-closer?
Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.
FD30 Fire Doorsets near Maghull
- Kirkby (3 miles)
- Litherland (4 miles)
- Ormskirk (4 miles)
- Bootle (4 miles)
- Formby (6 miles)
- Skelmersdale (7 miles)
Other fire doors in Maghull
- Riser & Service Cupboard Doors in Maghull
- Double & Leaf-and-a-Half Fire Doors in Maghull
- School & Healthcare Fire Doors in Maghull
- Commercial & Office Fire Doors in Maghull
- Security Fire Doors in Maghull
- FD30S Smoke Control Doorsets in Maghull
- HMO Fire Doors in Maghull
- Fire Door Ironmongery & Closers in Maghull
- FD30 Fire Doorsets across Merseyside
- All fire doors in Maghull