Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in Cwmbran

We supply and fit FD30 fire doors in Cwmbran (NP44) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £750 per single doorset in Cwmbran, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

FD30 Fire Doorsets for Cwmbran buildings

Fire Rated Doors supplies and fits FD30 fire doors in Cwmbran, Gwent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

Cwmbran is about 5 miles from Newport. Wherever your building is in NP44, we arrange survey and fitting dates around access and occupancy.

Which rules apply in Cwmbran?

In Cwmbran the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.

Cost of FD30 fire doors in Gwent

Guide prices for FD30 fire doors in Cwmbran run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Typical uses in Cwmbran

Wherever they are in Cwmbran, FD30 fire doors are most often specified for HMO bedrooms and kitchens and hotel corridors.

Gwent centres on Newport's city centre and council estates, with Cwmbran, Pontypool and the valleys towns adding schools and industry.

  • HMO bedrooms and kitchens
  • Hotel corridors
  • Offices and retail back-of-house
  • Plant rooms and stores

What's in the doorset

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

Four steps to compliant doors

  1. Tell us about the doors — photos help
  2. Free measure survey at your Cwmbran property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Your questions answered

Will I get certificates for the doors fitted in Cwmbran?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

What does a Cwmbran quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Cwmbran.

How thick is an FD30 door?

Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.

FD30 Fire Doorsets near Cwmbran

Other products in Cwmbran

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.