Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in Brent

We supply and fit FD30 fire doors in Brent (HA0) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £750 per single doorset in Brent, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

FD30 fire doors in Brent: how we work

We cover Brent and nearby Wembley for FD30 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Whether your building is in central Brent or on its edges towards Wembley, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

What the law says in Brent

Fire doors in Brent sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Guide prices in Brent

Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Brent quote is fixed after survey and itemised door by door.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where FD30 fire doors are needed

In Brent, FD30 fire doors are typically needed in plant rooms and stores and offices and retail back-of-house.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Plant rooms and stores
  • Offices and retail back-of-house
  • Hotel corridors
  • HMO bedrooms and kitchens

FD30 Fire Doorsets: key specification

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

How it works in Brent

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Can you work around tenants or staff in Brent?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Will I get certificates for the doors fitted in Brent?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you cover Brent?

Yes. We survey, supply and fit FD30 fire doors throughout Brent and the rest of Greater London, including HA0 and nearby Wembley.

Does an FD30 door need a self-closer?

Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.

Also covering towns near Brent

More doorsets for Brent

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.