FD30 fire doors in Pitsea: how we work
We cover Pitsea and nearby Basildon for FD30 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Pitsea is about 9 miles from Southend-on-Sea; we cover both, along with Basildon, South Benfleet and Wickford.
Which rules apply in Pitsea?
Fire doors in Pitsea sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD30 fire doors in Essex
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Pitsea are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD30 fire doors are used in Pitsea
Typical uses for FD30 fire doors in Pitsea include offices and retail back-of-house and hotel corridors.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Offices and retail back-of-house
- Hotel corridors
- HMO bedrooms and kitchens
- Plant rooms and stores
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD30 fire doors in Pitsea: questions
What does a Pitsea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Pitsea.
How quickly can you survey in Pitsea?
We arrange surveys around your access needs and, where possible, combine Pitsea visits with other work in Essex. Tell us your preferred dates when you enquire.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
FD30 Fire Doorsets near Pitsea
- Basildon (2 miles)
- South Benfleet (2 miles)
- Wickford (3 miles)
- Canvey Island (4 miles)
- Stanford-le-Hope (4 miles)
- Rayleigh (4 miles)
Other fire doors in Pitsea
- Fire Door Ironmongery & Closers in Pitsea
- School & Healthcare Fire Doors in Pitsea
- Acoustic Fire Doors in Pitsea
- FD90 & FD120 Doorsets in Pitsea
- Fire Door Replacement in Pitsea
- Fire Exit Doors in Pitsea
- Riser & Service Cupboard Doors in Pitsea
- Fire Door Supply & Fit in Pitsea
- FD30 Fire Doorsets across Essex
- All fire doors in Pitsea