FD30 fire doors in Ammanford | Supplied & Fitted

Certified FD30 fire doors for Ammanford

We cover Ammanford and nearby Gorseinon for FD30 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Ammanford is about 11 miles from Llanelli. Wherever your building is in SA18, we arrange survey and fitting dates around access and occupancy.

Regulations for FD30 fire doors in Dyfed

Wales issues its own version of Approved Document B, so new and replacement fire doors in Ammanford are specified against the Welsh guidance. The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, covering workplaces and the common parts of multi-occupied residential buildings, including flat entrance doors.

What do FD30 fire doors cost in Ammanford?

Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Ammanford are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Typical uses in Ammanford

Typical uses for FD30 fire doors in Ammanford include offices and retail back-of-house and hotel corridors.

West Wales demand comes from Llanelli's town centre and industry, university housing and coastal hotels and guest houses.

Offices and retail back-of-house
Hotel corridors
Plant rooms and stores
HMO bedrooms and kitchens

Doorset specification

Fire resistance	30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf	44mm timber, flush or with vision panel
Test evidence	BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
Closer	Overhead closer to BS EN 1154 (except locked cupboards)
Hinges	Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical

See the full specification and options for FD30 Fire Doorsets

Four steps to compliant doors

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Common questions in Dyfed

Will I get certificates for the doors fitted in Ammanford?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Is the survey in Ammanford free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do you cover Ammanford?

Yes. We survey, supply and fit FD30 fire doors throughout Ammanford and the rest of Dyfed, including SA18 and nearby Gorseinon.

Can I fit an FD30 door into my existing frame?

Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.

FD30 Fire Doorsets in Ammanford