Certified FD30 fire doors for Newton Abbot
We fit FD30 doorsets for flats, offices, HMOs and corridors in Newton Abbot and the rest of Devon. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Newton Abbot is about 25 miles from Plymouth; we cover both, along with Torquay, Paignton and Exmouth.
What the law says in Newton Abbot
New and replacement fire doors in Newton Abbot are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Newton Abbot
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Newton Abbot quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD30 fire doors are used in Newton Abbot
In Newton Abbot, FD30 fire doors are typically needed in hotel corridors and plant rooms and stores.
Devon's demand comes from Plymouth's post-war city centre and naval estate, Exeter's offices and student housing, and coastal hotels.
- Hotel corridors
- Plant rooms and stores
- Offices and retail back-of-house
- HMO bedrooms and kitchens
FD30 Fire Doorsets: key specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Devon
What does a Newton Abbot quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Newton Abbot?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD30 fire doors in Newton Abbot need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Nearby towns we cover
- Torquay (6 miles)
- Paignton (7 miles)
- Exmouth (11 miles)
- Exeter (14 miles)
- Heavitree (14 miles)
- Plymstock (24 miles)
Other fire doors in Newton Abbot
- FD60 Fire Doorsets in Newton Abbot
- Fire Door Supply & Fit in Newton Abbot
- Steel Fire Doors in Newton Abbot
- FD90 & FD120 Doorsets in Newton Abbot
- Acoustic Fire Doors in Newton Abbot
- Fire-Rated Screens & Fanlights in Newton Abbot
- Flat Entrance Fire Doors in Newton Abbot
- Commercial & Office Fire Doors in Newton Abbot
- FD30 Fire Doorsets across Devon
- All fire doors in Newton Abbot