Getting communal fire doors fitted in Doncaster
If your fire risk assessment in Doncaster has flagged doors to replace, we can schedule, quote and fit communal corridor and lobby fire doors to match its recommendations. Surveys in DN1 are free and quotes are fixed and itemised.
Where possible we combine Doncaster surveys with other visits in South Yorkshire, such as Bentley and Rotherham, which helps keep survey dates flexible.
Which rules apply in Doncaster?
New and replacement fire doors in Doncaster are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Communal fire doors prices in Doncaster
Our guide for communal fire doors is £1,600–£3,200 per pair fitted, ex VAT. Quotes for Doncaster are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where communal fire doors are needed
Sheltered and supported housing and blocks of flats are among the most common settings for communal fire doors, in Doncaster as elsewhere.
Sheffield's city-centre apartment and student blocks lead demand, with Rotherham, Doncaster and Barnsley adding warehouses, schools and estates.
- Sheltered and supported housing
- Blocks of flats
- Student accommodation
- Hotels
Doorset specification
| Rating | FD30S typical; FD60S in some lobbies |
|---|---|
| Configuration | Singles, pairs and leaf-and-a-half |
| Glazing | Vision panels sized to the doorset's evidence |
| Hold-open | Alarm-linked magnetic hold-open or free-swing closers (BS EN 1155) |
| Accessibility | Opening forces and vision panels to accessibility guidance (Approved Document M in England) |
See the full specification and options for Communal & Corridor Fire Doors
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about communal fire doors in Doncaster
Which rules do communal fire doors in Doncaster need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover Doncaster?
Yes. We survey, supply and fit communal fire doors throughout Doncaster and the rest of South Yorkshire, including DN1 and nearby Bentley.
What does a Doncaster quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Should communal doors be glazed?
Doors across corridors usually need vision panels so people can see who is on the other side. The glass must be tested in that doorset.
Neighbouring areas
- Bentley (1 mile)
- Rotherham (11 miles)
- Pontefract (14 miles)
- Chapeltown (14 miles)
- Barnsley (14 miles)
- Worksop (16 miles)
Other products in Doncaster
- HMO Fire Doors in Doncaster
- FD30 Fire Doorsets in Doncaster
- Fire Doors for Homes in Doncaster
- Double & Leaf-and-a-Half Fire Doors in Doncaster
- Riser & Service Cupboard Doors in Doncaster
- Security Fire Doors in Doncaster
- Fire Door Supply & Fit in Doncaster
- Commercial & Office Fire Doors in Doncaster
- Communal & Corridor Fire Doors across South Yorkshire
- All fire doors in Doncaster