Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 / FD60Access controlVeneered

Commercial & Office Fire Doors in Tamworth

We supply and fit commercial fire doors in Tamworth (B77) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £850 per single doorset in Tamworth, supplied & fitted, ex VAT

Oak-veneered fire door with narrow vision panel in an office corridor

Certified commercial fire doors for Tamworth

Fire Rated Doors supplies and fits commercial fire doors in Tamworth, Staffordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

Tamworth is about 33 miles from Stoke-on-Trent; we cover both, along with Lichfield, Sutton Coldfield and Aldridge.

Regulations for commercial fire doors in Staffordshire

Fire doors in Tamworth sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Cost of commercial fire doors in Staffordshire

Our guide for commercial fire doors is £850–£1,500 per single doorset fitted, ex VAT. Quotes for Tamworth are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Typical uses in Tamworth

Wherever they are in Tamworth, commercial fire doors are most often specified for office fit-outs and retail units.

Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.

  • Office fit-outs
  • Retail units
  • Restaurants and commercial kitchens
  • Hotels

Commercial & Office Fire Doors: key specification

RatingFD30 or FD30S typical; FD60 to cores and plant
FinishesOak, walnut or ash veneer, laminate, paint-grade
Access controlElectric locks and maglocks tested with the doorset
GlazingNarrow or full vision panels
ComplianceFire risk assessment under the fire safety law where the building is
Elevation drawing of commercial & office fire doors

See the full specification and options for Commercial & Office Fire Doors

How it works in Tamworth

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Commercial fire doors in Tamworth: questions

Which rules do commercial fire doors in Tamworth need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Will I get certificates for the doors fitted in Tamworth?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you fit just one door in Tamworth?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Staffordshire.

Do office fire doors need vision panels?

Doors across corridors and doors that swing into circulation routes usually should, for safety and accessibility.

Commercial & Office Fire Doors near Tamworth

Also available in Tamworth

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.